1) Go to Self Service > Printers then add desired plotter.
Read description then select (re)install.
2) Once installed, open a print window using an application. Usually this can be opened via File > Print or Command + P.
Verify that you have selected the printer you wish to use.
Select Paper Handling.
3) In the paper handling settings, toggle on Scale to Fit Paper Size then select the desired paper size. In this case, ANSI E* will be chosen as an example for the Destination Paper Size due to this size being a 4x scale of a letter sized (8.5 x 11) paper. Once finished, select Print.
Other sizes can be chosen as well for the Destination Paper Size. As you hover over the paper size, the dimensions will show. Depending on width of the roll currently installed on the plotter, it is best not to exceed that width. Make sure the size chosen is scaled correctly for print job.
If instructions are followed using ANSI E, print job will result with a piece of paper that is 4x larger in terms of both width and length.
*Sample size used for this is ANSI E but we cannot guarantee the quality of the print job if other size(s) are used since desired size can/will vary from user to user.