Red - DM Out (Box) to DMC port (Wall) using Cat 6 Ethernet cable. Required for video connection. The usual wall ports used are the bleachers on the same side as the weight room.
Orange - HDMI In via DM Box to end user device (Laptop, Desktop, phone, etc). Adapter may vary depending on which desired device needs to be plugged in. In most use-cases, USB-C to HDMI adapter is used (see below).
Yellow (OPTIONAL) - If only audio is needed, then this could be used to connect any device to the Gymnasium speakers. Volume controls are handled via device connected and program volume on the Crestron Touch panel. It is recommended to not max out the volume on the Crestron touch panel and rather the connected device's volume controls. DO NOT connect green in diagram if using this connection
Green (OPTIONAL) - USE YELLOW IF USING (ONLY) AUDIO. ONLY USE THIS IF YELLOW CONNECTION IS NOT WORKING. If not using the projector, only audio can be connected to the DM Box. Verify that input is still set to DM Input using the Crestron Control Panel. DO NOT connect yellow in diagram if using this connection.
Crestron Touch Panel Inputs (KHS Gym) for devices connected to:
-North Wall (to the left of projector screen): Digital Media Input 1
-East Wall (bleachers near weight room): Digital Media Input 2
Click here for guide on using the Crestron Control Panel in order to change inputs, toggle projector on/off, and/or raise/lower screen.